Anker Power Bank Recall: Models, Fire Risks & Checks

The U.S. Consumer Product Safety Commission confirmed on June 12, 2025, that more than 1.1 million Anker PowerCore 10000 power banks carry a documented fire hazard—and the company’s voluntary recall means affected units can now be replaced for free. Here’s everything you need to know about whether your model is affected, what to do next, and how this recall fits into Anker’s broader safety history.

Recalled Units: 1,158,000 · Primary Hazard: Fire and Burn · Key Model: PowerCore 10000 (A1263) · Recall Date: June 12, 2025 · Initiator: Anker Innovations (Voluntary)

The recall details from the CPSC and Anker’s own recall portal confirm the scope of this safety notice.

Which Anker power banks have been recalled?

The recall targets one specific model: the Anker PowerCore 10000 with model number A1263. According to the CPSC, approximately 1,158,000 units are affected. These were manufactured between January 1, 2016, and October 30, 2019, and sold through December 31, 2022.

PowerCore 10000 (A1263)

• The device is black, blue, red, or white with “Anker” engraved on the front
• Model number A1263 and serial number (SN) appear on the bottom of the unit
• Units sold at Anker.com, Amazon, Newegg, and eBay for approximately $27
• Sold in the United States only—this recall does not apply to units purchased elsewhere

This recall is distinct from a separate September 2025 recall involving models A1647, A1652, A1257, A1681, and A1689. That recall covered 481,000 units with 33 fire incidents and 4 minor burn reports. The A1263 recall applies to a different product generation sold between 2016 and 2022.

Global recall models

Consumer Reports confirmed the scope of the A1263 recall, noting it represents one of the larger consumer electronics recalls in recent years.

Why is Anker having so many recalls?

The core issue behind the A1263 recall—and Anker’s other recent recalls—is the inherent risk of lithium-ion batteries, particularly in high-capacity power banks. According to the CPSC notice, the lithium-ion battery in these power banks can overheat, posing fire and burn hazards to consumers.

Fire and burn hazards

Anker reported 19 incidents of fires and explosions to the CPSC. Of these, 11 incidents caused property damage totaling more than $60,700. Two incidents resulted in minor burn injuries that did not require medical attention. Users are advised to power off and stop using the device immediately if they own a recalled unit.

Lithium-ion battery overheating

Anker states the recall is being conducted in coordination with the CPSC out of an abundance of caution. The voluntary nature of the recall—versus a mandatory agency recall—means Anker initiated the process proactively after identifying the risk.

“We’re conducting this recall out of an abundance of caution to ensure the safety of our customers.”

— Anker Innovations (Official Recall Notice)

Is the Anker power bank safe?

For unaffected models, standard safety precautions apply. For recalled units, the risk is serious: the CPSC explicitly warns of potential injury or death from fire and burn hazards. The implication is that any confirmed-recall unit should be handled as a potential fire risk, not a simple malfunction.

Post-recall safety

• Check your serial number immediately at anker.com/product-recalls
• If affected, stop using the device and do not leave it charging unattended
• Submit your information through Anker’s recall form for a free replacement
• Once confirmed, dispose of the unit at a certified lithium battery recycling facility

General usage risks

For non-recalled Anker power banks, general lithium-ion safety guidelines apply: avoid extreme temperatures, do not puncture the device, and stop using if you notice swelling, excessive heat, or unusual odors. The CPSC data shows that affected A1263 units produced documented fire incidents, making verification essential before continued use.

What are the common problems with Anker power banks?

The A1263 recall centers on documented fire ignition risks, but consumer reports indicate other recurring issues with Anker power banks, including capacity discrepancies, charging speed limitations, and physical durability concerns.

Overheating issues

For the A1263 specifically, the CPSC documented 19 fire and explosion incidents along with 2 minor burn injuries and $60,700 in property damage. This represents a confirmed, not speculative, risk for affected units.

Other reported faults

According to user reports on the Rick Steves travel community forum, some consumers received Amazon email notifications about the recall, though the verification process itself was described as straightforward. Clemson University’s fire department also published an alert summarizing the recall and safety steps.

Is it safe to leave an Anker power bank charging overnight?

For recalled A1263 units, the answer is definitively no—leaving any lithium-ion device charging unattended increases fire risk, and the A1263’s documented defect makes this particularly dangerous. For non-recalled units, standard guidance is to avoid prolonged charging sessions when possible, though modern power banks generally have protective circuits.

Charging best practices

• Avoid charging overnight or for extended periods without monitoring
• Keep the power bank on a non-flammable surface while charging
• Do not cover the device with blankets, clothing, or other materials
• Disconnect once fully charged if practical

Overnight risks

Lithium-ion batteries can experience thermal runaway if subjected to heat buildup or manufacturing defects. For recalled A1263 units, the combination of known battery defects and unattended charging creates a compounding risk scenario. The implication: if you own a recalled unit, treat it as a fire hazard regardless of whether it’s currently charging. For more information on the Anker power bank recall, consult the millors jocs d’olles i paelles.

The unconfirmed items represent open questions where the article presents known facts versus areas requiring further verification from official sources.

For anyone who purchased a PowerCore 10000 between 2016 and 2022, the path forward is clear: check your serial number, stop using the device if affected, and claim your free replacement. The recall doesn’t erase the incidents that already occurred, but it does give current owners a straightforward way to eliminate the risk from their homes and bags.

Related reading: Nike Zoom Vomero 5: Review, Running Fit & Podiatrist Tips · How to Make a Budget Using 50/30/20 Rule for Beginners

Anker’s voluntary recall targets the PowerCore 10000 model A1263 due to fire hazards, with detailed owner recall guide covering serial checks and replacements.

Frequently asked questions